|
|
Mackie 1402VLZ PRO Professional 14x2 Compact Mixer
| List Price | Manufacturer | US price $ 519.99 | | | |
| New | zZounds | US price $ 399.95 | 23 % off |  | | | New | | Europe prices: None yet | | | |
| + Add Price |
Prices subject to change.
- New Prices: Completely new product, lowest online price Guarantee
- B Stock Prices: Damaged Box, Demo products
- Factory Resealed Prices: Box opened en resealed in the factoy
- Warehouse Resealed Prices: Box opened en resealed in the wharehouse
- Blemished Prices: Small scratches on products from transportation etc
- Used Prices: Products have been used
All sold prices are in perfectly working order and have a working order guarantee.
|
This 14x2x1 mixer includes Mackie's new XDR (eXtended Dynamic Range) mic preamps with sound quality matching or exceeding the performance of $500 to $2000-per-channel esoteric preamps.
1402VLZ PRO Professional Mixer Features
• Ultra-low noise, highest headroom in its class • 6 new precision-engineered XDR™ Extended Dynamic Range premium studio-grade mic preamps with: • -Ultra-wide 0-60dB gain range • -130dB dynamic range for 24-bit, 192kHz sampling rate inputs • -+22dBu line input handling • -Distortion under 0.0007% (20Hz-20kHz) • Advanced DC-pulse transformer RF rejection • 60mm long-wearing log-taper faders • 14 line inputs (6 mono, 4 stereo pairs) • Separate RCA-type tape/CD inputs and tape outputs (unbalanced) • 2 aux sends with 15dB of gain above Unity • Aux 1 pre/post • Constant-loudness pan pots • Switchable AFL/PFL Solo • 2 stereo aux returns with EFX to Monitor switch • Aux 1 master with Monitor/Post assign switch • 3-band active EQ (80Hz, 2.5kHz, 12kHz) • 18dB/oct. 75Hz Lo Cut filter eliminates stage rumble, wind noise, P-pops, and low frequency recording studio room resonances • Extra ALT 3-4 stereo bus for submixes, separate recording, monitor, and "mix minus" feeds • Control Room/Phones multi-input source matrix • Phantom power for premium condenser mics • Rugged steel chassis, sealed rotary controls • Built-in power supply — no wall wart! • About XDR: eXtended Dynamic Range Mic Preamps • No matter how much you spend on a microphone, its ultimate performance depends on how it interacts with the preamp it's plugged into. Many high-end mic preamps can effortlessly amplify the slightest sonic nuance, creating an aural panorama that's breathtakingly realistic, excitingly vivid, and truly 3-dimensional in scope. For years they've provided fidelity that just hasn't been possible with the "stock" mic preamps built into mixing consoles. Until now. • To develop the new XDR(tm) (eXtended Dynamic Range) mic preamp, Mackie's engineering team started with blank paper, concerned only with matching or exceeding the performance of $500 to $2000-per-channel esoteric preamps. They went through hundreds of iterations and revs and spent countless hours subjectively listening (and arguing). They started all over again several times. They scoured the world for rare parts. Then they spent more time critically listening and evaluating the design with every high-end microphone you can think of. Then they brought in veteran recording and live sound engineers for more exhaustive listening tests. • What they ultimately ended up with is not just an awesome sounding design. XDR is also a) highly resistant to damage caused by "hot patching" (caused by routing a phantom powered mic through a patch bay); b) remarkably independent of cable-induced impedance variations; and c) able to reject extremely high RF levels without compromising high frequency response. • Because a mic preamp must amplify faint one millivolt input signals up to a thousand-fold (60dB), its rectification components can also pick up radio frequency interference (RFI) from AM and FM stations, cell phones, and pager transmitters — even microwave ovens — and amplify them to audible levels. • Mackie assaulted RFI on 3 fronts. First, they incorporate bifilar wound DC pulse transformers with high permeability cores that reject RFI but don't attenuate the sound at 15kHz and above. Second, they use carefully matched, high-precision components for critical areas of the XDR preamplifier. Third, they direct-coupled the circuit from input to output and used pole-zero cancellation constant current biasing (which also avoids increased intermodulation distortion at high common mode signal levels). • Bottom line for the non-technical: you can use the new XDR mic preamps at the end of extremely-long cheap mic cables in an RFI-saturated urban environment while talking on your cell phone... without hearing a trace of RFI. • If a mic preamp isn't designed right, it will actually sound different depending on the impedance of the microphone and the cable load! XDR's Controlled Interface Input Impedance system accepts an enormous range of impedances without compromising frequency response. • 0.0007% Total Harmonic Distortion. The lowest ever in any compact mixer. • Flat response. Not only are XDR mic preamps flat within a tenth of a dB across the bandwidth of any known microphone, but are also only 3dB down at an astonishing 192kHz! • Super-low intermodulation distortion at very high operating levels thanks to instrumentation-style balanced differential architecture, linear biasing, and use of DC-coupled pole-zero-cancellation constant current that frees the mic preamp from power supply fluctuations. • Think of the 1402 as an ultra-premium, esoteric mic preamp... that just happen to have really excellent compact mixers attached.Technical Description • Main Mix Noise • 20Hz-20kHz bandwidth, 1/4 in. Main out, channels 1-6 Trim @ unity gain, channel EQs flat, all channels assigned to Main Mix, channels 1 and 3 Pan left, 2 and 4 Pan right • Main Mix fader down, channel faders down: -100dBu • Main Mix fader unity, channel faders down: (90dB Signal-to-Noise Ratio, ref +4dBu) -86.5dBu • Main Mix fader @ unity, channel faders @ unity: -84.5dBu • Total Harmonic Distortion (THD) • 1kHz @ +14dBu: 20Hz-20kHz • Mic in to Main out: 0.0007% • Attenuation (Crosstalk) • 1kHz relative to 0dBu, 20Hz-20kHz bandwidth, Line in, 1/4 in. Main Out, Trim @ unity • Main fader down: -85dBu • Channel Alt/Mute switch engaged: -84dBu • Channel fader down: -83dBu • Frequency Response • Mic input to any output • 20Hz to 60kHz: +0dB/-1dB • 10Hz to 100kHz: +0dB/-3dB • Equivalent Input Noise (EIN) • Mic in to insert Send out, max gain • 150-ohm termination: -129.5dBm unweighted • Common Mode Rejection (CMR) • Mic in to insert Send out, max gain • 1kHz: better than 90dB • Maximum Levels • Mic In: +22dBu • Tape In: +16dBu • All other inputs: +22dBu • Main Mix XLR outputs: +28dBu • All other outputs: +22dBu • Impedances • Mic In: 1.3 kilohms • Channel Insert return: 2.5 kilohms • All other inputs: 10 kilohms or greater • Tape out: 1.1 kilohms • All other outputs: 120 ohms • EQ • High Shelving: ±15db @ 12kHz • Mid Peaking: ±12dB @ 2.5kHz • Low Shelving: ±15db @ 80Hz • Power Consumption • 120VA.C., 50/60Hz, 25 watts • Fuse Ratings • 120V: 0.5A Slo Blo, 5 x 20mm • 220-240V: 0.25A Slo Blo, 5 x 20mm • Weight • 9.5 lbs. (4.5 kg)
Mackie 1402VLZ PRO Professional Mixer Your review of the 1402VLZ PRO Professional 14x2 Compact Mixer
Average rating:
8.4¯
|
|
Mackie Mackie 1604VLZ PRO Professional 16x4x2 Compact Mixer Mackie 1682 Studio Console Mackie D8B Digital 8-Bus Mixer Mackie 1642VLZ PRO Mixer Mackie 1202VLZ PRO Mackie S500 15 Inch Passive Sound Reinforcement Speaker Mackie DFX12 12-Channel Mixer with Effects Mackie SA1521 Active 15 in., 2-Way Loudspeaker Mackie SR1530 Active 3-Way Sound Reinforcement Speaker Mackie SRM350 2-Way Bi-Amped PA Speaker (10 in.) Mackie SR1530Z 3-Way Active Loudspeaker Mackie 406M Powered Mixer (Mono, 500 Watts) Mackie PDI8 8 Channel AES EBU Digital Input Output Card Tapco by Mackie 6306 6-Channel Mixer Mackie RackMount 1202VLZ Rackmount Brackets for the MS120 Mackie Rack Ears For The 1642VLZ Pro Mackie RackMount 1402VLZ Rackmount Brackets for the MS140 Mackie DIO8 Mackie 24-Bit Digital Interface Card Mackie HDR2496 24-Bit 24-Track Hard Disc Recorder Mackie MDR2496 24-Track Hard Disk Recorder Mackie Control Universal 8-Channel Master Controller Mackie Control Extender 8-Channel Expander for Control Mackie SR32.4 Audio Mixer (32 x 4 x 2 x 1) Mackie Onyx 1640 16-Channel Mixer Mackie SWA1501 Powered 15 in. Subwoofer Mackie 808S Powered Mixer (Stereo, 1200 Watts) Mackie 808M Powered Mixer (Mono) Tapco by Mackie Blend 6 Compact 6-Channel Mixer Mackie Onyx 800R 8-Channel Microphone Preamp with Digital Mackie Onyx 3280 Live Mixing Console Mackie Onyx 4880 Live Mixing Console Mackie Onyx 2480 Live Mixing Console Mackie Onyx 4080 Live Mixing Console Mackie Onyx 1620 16-Channel Mixer Mackie Onyx 1220 12-Channel Mixer Mackie C300z Compact Passive 2-Way Loudspeaker (1x12 in.) Mackie SA1521Z 2-Way Active Loudspeaker (400 Watts, 1x15 Mackie Onyx 1220 12-Channel Mixer Mackie Onyx 400F FireWire Audio Interface Mackie Onyx 32 Mixer Mackie Onyx 24 Mixer Mackie QuadCompGate 4-Channel Digital Compressor/Gate Tapco by Mackie LinkUSB 2-Channel USB Audio Interface Tapco by Mackie LinkMIDI 4-Channel USB MIDI Interface Mackie SA1530Z 3-Way Active Loudspeaker (1300 Watts, 1x15 Mackie SA1532Z 3-Way Active Loudspeaker (1300 Watts, 2x15 Mackie SR1521Z 2-Way Active Loudspeaker (1x15 in.) Mackie SWA1801 Powered Subwoofer (18 in., 900W ) Mackie QuadEQ 4-Channel Digital Graphic Equalizer Mackie 1402VLZ PRO Professional Mixer • Mackie
• Add Comment or Question • Write a review!4) Record Producing: Producer Basics
1402VLZ PRO Professional Mixer
• ListPrice:$ 519.99 • Available the US for online order from: zZounds • Price:$ 399.95
Buy Online • Easy 30 day return policy • Buying online is safe, secure.. guaranteed!
| | Tab & Sheet Music |
Search Tab & Sheet Music for
Find Sheet Music, Scores, Guitar Tab, Lyrics, Bass Tab, Drum Tablature in seconds and buy safe and secure online
|
|