| CRMAV | LiveSoundPASystems | RecordingMixingMastering | DJmusicEquipment | DigitalPianosKeyboards | SingingSongwriting | MusiciansNews | GuitarsMusicGear | BassMusicGear | DrumsMusicGear | GuitarSheetMusicTabs |
 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Gear Speaker Audio PC Soundcard Mac Software Books Mixer MIDI Keyboards Recording Effects Music Software Microphones USB Microphones Wireless Turntables Effects DVD Video PA | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturers | Behringer Peavey Yamaha Samson Digitech sE Electronics Focusrite Roland Digidesign Korg Alesis Shure Boss Mackie Akai M-Audio Vestax SKB AKG CBI Nady Fostex Apple Numark Stanton Pioneer Novation Tascam Steinberg Edirol Rode Audio Technica | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Recording | Mixing | Mastering | Editing | Songwriting | Sequencing | Post Production | Surround | Live Sound | Trade Shows | Forums | Musician Search | Sitemap | ||||||||||||||||||||||||||||||||||||||||
|
Studio Projects VTB1 Variable Tube Microphone Preamp
The new Studio Projects VTB-1 is the ultimate in low cost mic preamplifier technology. Incorporating true class A/B switching, the VTB-1 is a totally discrete circuit. Unique to the VTB-1 is the "Tube Drive." The Tube Drive is a variable drive to a 12AX7, that allows the user to blend as little, or as much of the Tube Drive they want. This VTB-1 allows the user the most flexibility of any mic preamplifier in it's price class. The VTB-1 allows you to go from a pristine solid state sound, to any combination of Tube Drive you choose... even hard distortion for guitars and bass! The VTB-1 is must have device as the perfect mic preamplifier for any microphone! VTB1 Variable Tube Microphone Preamp Features : 48-Volt Phantom Power Phase Reverse Variable Input Gain Control On Detented Pot 1/4 in. D.I. Jack On Front Panel High Pass Filter Descrete Solid State Class A/B Design TRS Insert Mic/Line Switch VariableTube Blend On Detented Pot Meter Read Select Between Input and Output level Switchable Impedance between 50/200 Ohm 5 position LED metering XLR mic input Balanced outputs on XLR and 1/4 in. External AC Power Supply For extreme Low Noise Operation (Included) Output Gain Control On Detented Pot Applications: A superb vocal mic pre with warm transparent character Great for use as a Tube DI Box Great for production, broadcast, and voice over work Perfect for the professional and home project studio A quality vocal mic preamplifier suitable for all vocal styles Circuit Topology: Mic Preamp Discreet, current-source fed, paralleled-transistor balanced input stage feeding a bipolar opamp balanced-unbalanced converter. Dual feedback design for low distortion performance. 2-Stage design for increased performance; transistor stage provides up to 45dB gain, 2nd stage contributes up to 15dB gain. Line Input FET-input opamp buffer with hi input impedance to avoid pickup loading when used as an instrument preamp. 2nd stage provides adjustable gain from 10dB to 30dB, constant hi-impedance is maintained. Hi-pass filter: 75Hz hi-pass filter for low-freq wind and rumble elimination (3-pole filter @-18dB/oct). Tube Blend Constant-level blend control allows the user to smoothly change from an all solid-state path to a tube-based preamp. This allows the user to add the desired amount of tube sound to the signal without having to deal with complicated "tube drive" controls and such. Alternately, it allows the user to use only the solid-state portion of the preamp to get a very low distortion, un-colored sound when desired. Tube Stage 12AX7 vacuum tube with DC filament supply for minimum hum and noise. 1st half of tube is operated as a hi-gain amplifier stage, 2nd half operates as a cathode follower to minimize loading of the first stage. A low-voltage plate supply is used to create a "starved-tube" condition for enhanced sound. Output Stage Bipolar, lo-noise, hi output-current opamp used for best performance. 1st stage is used to provide additional gain (6dB) and drives the Line out jack and Pin-2 of the balanced out. The 2nd stage provides signal inversion and drive for Pin-3 of the balanced output (effectively an additional 6dB gain). For Best Tube-Sound Results The tube operates best when provided with a solid signal. The best way to accomplish this is to use the on-board metering to set the internal levels. Press the Meter Select switch IN, the meter will now display the signal level within the preamp, just before the tube stage. Adjust the GAIN control to get a meter reading within the 0 to +8 range. With the OUTPUT control at "0", start turning the BLEND control clockwise until the desired sound is heard. Depending on the source material, more or less BLEND will be needed. If the output level is too high or low for your following equipment, adjust the OUTPUT control to compensate. This wont change the sound of the blended signal, just the overall level. Technical Description Maximum Gain : Mic In to Bal Out: 72dB (60dB preamp gain, 12dB output gain) Line In to Bal Out: 42dB (30dB preamp gain, 12dB output gain) Distortion/Noise (THD + Noise): -20dBu input-Mic; 0dBu input-Line Both measured at +15dBu output Mic or Line In to Bal or Line Out:
|
Studio Projects Studio Projects Rack Kit for VTB1 Studio Projects SPPS Power Supply for VTB1 Studio Projects VTB1 Variable Tube Microphone Preamp Studio Projects Add Comment or Question Write a review!
| ||||||||||||||||||||||||||||||||||||||||||||||||||
Europe Gear Shop
| [Contact] [©1999-2008 CRMAV.com All rights reserved] [Advertising] |