|
|
Rode NT5 Condenser Microphones Pair
The Rode NT5 is a condenser microphone specifically designed for instruments including guitar, saxophone, drums, violin, and many others. Its design allows for tight positioning where small mics are most useful. They come as a matched pair complete in a case with a stand mounts and windscreens.
NT5 Condenser Microphones Specifications• Acoustic Principle: Externally polarized single diaphragm condenser transducer • Capsule Size: 0.5 in. (13 mm) • Active Electronics: JFET Impedance converter with bipolar output buffer • Directional Response: Cardioid • Frequency Response: 20Hz to 20kHz • Sensitivity: -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL • Equivalent Noise: 128 dB • Maximum SPL: 143 dB @ 1% THD into 1k ohm • Signal to Noise: 78dB • Power Requirements: 4 mA • P48 Supply (38Vš52V) 2 mA • P24 Supply (20V-26V) The microphone operates in accordance with the above specifications to a minimum of 18V. It will operate with some performance degradation below 18V.) • Packed Weight: 1.8 kg (Mic only 100g)
|